Air-to-water heat pump 30 kW FULL SPLIT EVI DC
Первоначальная цена составляла 233410 MDL.221463 MDLТекущая цена: 221463 MDL. + VAT
Model AWHP30FDELT
- Thermal power: 30 kW
- Class: PREMIUM
- Heating surface: 120–400 m²
- Heating temperature: +60°C, +75°C sau +85°C
- Ambient temperature: –25°C
- Configuration: FULL SPLIT (indoor + outdoor unit)
- Technology: EVI + inverter
- Functionalities: heating, cooling, domestic hot water
- Supply voltage: 380 V, 50 Hz
Made in Moldova
1 in stock
Air-to-water heat pump 30 kW — FULL SPLIT EVI DC configuration
Air-to-water heat pump 30 kW FULL SPLIT EVI DC is a solution PREMIUM for home heating, summer cooling and domestic hot water preparation, usable in any season. Combining vapor injection technology (EVI), inverter compressor and advanced configuration FULL SPLIT, Pompa de căldură aer-apă 30 kW oferă performanță optimă și eficiență energetică chiar și la temperaturi exterioare extreme de până la –25°C.
What does FULL SPLIT configuration mean and why is it important?
Air-to-water heat pump 30 kW FULL SPLIT EVI DC is the most advanced construction variant of air-to-water heat pumps. In this configuration:
- Outdoor unit contains only fans and the air-to-refrigerant heat exchanger;
- All critical components (compressor, inverter module, EVI system, freon-water exchanger, automation) are located in indoor unit.
This separation brings considerable advantages:
- compressor is not exposed to frost, extending the life of the equipment;
- Heat exchanger freon-water does not risk freezing, eliminating the need for electrical protection resistors;
- Operating costs are lower because it is not necessary to heat the components in winter;
- The risk of damage due to low temperatures is eliminated;
- Installation is more flexible — the indoor unit can be mounted in well-insulated technical spaces.
EVI technology: increased efficiency in the cold season
EVI (Enhanced Vapor Injection) technology allows the 30 kW air-to-water heat pump model to operate optimally even at extreme temperatures. How does it work?
Instead of sending all the refrigerant into a single circuit, the EVI system reintroduces some of the partially superheated vapor into the compressor. This has the effect of:
- Increased condensing pressure and temperature;
- Improving thermal capacity at negative outdoor temperatures (–15…–25°C);
- Increased coefficient of performance (COP) in difficult regimes;
- Reducing defrosting time and additional consumption in winter mode.
The result: and COP above 4.5 even in winter, comparable or superior to geothermal solutions.
Main technical features
- Thermal power: 30 kW.
- Heating surface: 120–400 m².
- Minimum operating temperature: –25°C.
- Configuration: FULL SPLIT (indoor + outdoor unit).
- Technology: EVI + inverter.
- Functionalities: heating, cooling, domestic hot water.
- Guarantee: 3 years.
Intelligent and adaptive control
The 30 kW FULL SPLIT EVI DC air-to-water heat pump is compatible with smart home systems. It can be controlled via a mobile application for:
- Temperature programming;
- Consumption monitoring;
- Remote diagnosis and notifications in case of error.
Air-to-water heat pump 30 kW FULL SPLIT EVI DC. Advantages of use
- Energy efficiency: up to 75% of the energy is obtained from outside air;
- Reliability in the cold season: stable operation down to –25°C without additional resistors;
- Safe installation: no risk of freezing or mechanical damage to the compressor or exchanger;
- Durability: over 15 years with minimal maintenance;
- Compatibility: can work together with photovoltaic solar panels or thermal batteries;
- Ecological: without direct CO₂ emissions, in accordance with European decarbonization legislation.
Comparison with other heating systems
Parameter | FULL SPLIT | Monobloc | Gas boiler | Electric boiler |
---|---|---|---|---|
Working temperature | –25°C | –10°C | Any | Any |
Energy source | Air | Air | Gas | Electricity |
COP efficiency | 4.5+ | 3.2–3.8 | ~1 | 1 |
Ecological | ✅ | ✅ | ❌ | Average |
Automation | ✅ | ❌ | ❌ | ❌ |
Operating costs | low | Media | Media | high |
ALTAL GROUP services
- Customized equipment design and selection;
- Professional delivery and installation in Moldova, Romania and Ukraine;
- After-sales service, maintenance and original parts;
- Extended warranty and free consulting for end customers and companies.
Frequently asked questions
Is it suitable for a private home? — Yes, up to 400 m².
Can it work in the cold season? — Yes, down to –25°C thanks to EVI technology.
How long is the lifespan? — Over 15 years with minimal maintenance.
Order now air-to-water heat pump 30 kW FULL SPLIT EVI DC from ALTAL GRUP
WE PRODUCER, not just distributors. The equipment is manufactured in Moldova and Romania, tested locally, and each unit is checked before delivery. This way you have the guarantee of quality and full technical support.
Contact us directly:
See all available models on altal.md and altal.ro
Made in Moldova
Вес | 220 кг |
---|---|
Габариты | 1110 × 475 × 1355 см |
Heat pump type | |
Compressor | |
Thermal power, kW | |
Vapor injection | |
Working method | |
Heating surface, m² | |
Water temperature, ℃ | |
Model |
Instructions
ENGLISH
![]() |
Air-to-water heat pump user manual | ||
![]() |
Air source heat pump installation manual | ||
![]() |
Air source heat pump specifications |
Russian
![]() |
Air to Water Heat Pump Operating Manual | ||
![]() |
Air Source Heat Pump Installation Guide | ||
![]() |
Air source heat pump characteristics |
English
![]() |
Air to Water Heat Pump Operation Manual | ||
![]() |
Air Source Heat Pump Installation Manual | ||
![]() |
Air Source Heat Pump Specifications |
Ukrainian
![]() |
Air-to-water heat pump operating manual | ||
![]() |
Air source heat pump installation guide | ||
![]() |
Air source heat pump characteristics |
charts
Артем –
Встановив в Одесі 2021 року. Дякую!